FSP PSU 250W TFX 12v v.2 175 x 85 x 70 mm 80 Plus FSP250-60GHT

High efficiency 80% Plus. Low ripple & Noise. Output over voltage protection. Short circuit protection on all output. 100% burn-in under high ambient temperature (50°C). Vacuum-impregnated transformer. MTBF: 100K hours at 25°C. 100% Hi-pot tested. Line input fuse protection. With 8cm fan.

• High efficiency

• Low ripple & noise

• Output over voltage protection

• Short circuit protection

• Resettable power shut down

• 100% burn-in test

• MTBF: 100K hours at 25°C

• Temperature range: operating 0°C~50°C storage-20°C~+65°C

• Temperature coefficient: 0.01%°C

• Transient response: output voltage recovers in less than 1 ms max. following a 25% load change

• Hold-up time: 17.0 mS minimum at 115V / 60 Hz.

17.0 mS minimum at 230V / 50 Hz.

• Dielectric withstand: input / output 1800VAC for1 second, input to frame ground 1800VAC for 1 second

• Humidity: 5~95% RH

• Efficiency: 80% min. at full load. Average efficiency 83.77%

• Power good signal: turn-on delay 100ms to 500ms

• Over current protection

• Over voltage protection: +5V +3.3V +12V

• Short circuit protection

• Voltage: 110-230VAC (With PFC)

• Frequency: 47Hz to 63Hz

• Input current: 4 amps maximum / 115 Vrms

1.5 amps maximum / 230 Vrms

• Inrush current: 50 amps cold, 80 amps warm measured at 230 Vrms

• Size 85mm L x 65mm (70mm to top of fan) W x 175mm Deep

• 1 x 20 + 4way, 3 x HD, 1 x FD, 1 x P4, 2 x SATA connector

• DC Lead length 20cms M/B, 30cms HD, FD,12vP4, 60cms Sata.